How to Fix Windows 11 Update Error KB5064401 and Diagnose Repeated Installation Failures

Reset the Windows Update components first, then check system file health, free space, and the exact error code behind KB5064401. Repeated Windows 11 update failures are usually caused by a damaged update cache, missing servicing files, low disk space, driver conflicts, or security software blocking the installer. Microsoft keeps a public Windows 11 update history with known issues and release notes [source: Microsoft], so check it before you spend an hour fixing a problem that Microsoft may already be tracking.

TLDR

If KB5064401 keeps failing, start with the simple fixes: restart, pause updates for seven days, resume them, and make sure you have at least 20 GB of free space. Then run DISM and SFC, reset the Windows Update cache, and install the update manually from the Microsoft Update Catalog if needed. For example, if 6 out of 40 company laptops fail at 73% with the same error code, that points to a shared driver, policy, or antivirus issue rather than random bad luck. Do not keep clicking “Retry” forever; it rarely helps and wastes time.

1. Write down the real error code

KB5064401 is the update package name. It is not the full diagnosis. Windows usually hides the useful part behind a short code such as 0x800f0922, 0x80073712, 0x80244022, or 0x80070002.

  1. Open Settings.
  2. Go to Windows Update.
  3. Select Update history.
  4. Find KB5064401.
  5. Write down the failure code and the install percentage where it stops.

This matters. A failure at 0% often points to download or service trouble. A failure at 70% to 99% often points to servicing, drivers, or rollback during restart. Honestly, it feels like Windows should make this clearer, but it often buries the one clue you need.

2. Do the quick checks first

Before running deeper repairs, remove the obvious blockers.

  • Restart the PC, not just shut it down.
  • Disconnect VPNs and metered mobile hotspots.
  • Keep the laptop plugged in.
  • Free at least 20 GB on the system drive.
  • Unplug nonessential USB devices, docks, printers, and external drives.
  • Temporarily pause third-party antivirus if your security policy allows it.

Then go to Settings > Windows Update, click Pause for 1 week, wait 30 seconds, and click Resume updates. This forces Windows to refresh its update scan. It sounds too basic. It still works more often than it should.

3. Repair Windows system files

Corrupt servicing files can stop cumulative updates like KB5064401. Run these commands from Command Prompt or Windows Terminal as administrator.

DISM /Online /Cleanup-Image /RestoreHealth

Wait for it to finish. Then run:

sfc /scannow

If SFC says it repaired files, restart the PC and try KB5064401 again. If DISM fails, check your internet connection and try again later. Microsoft lists DISM as a standard repair method for Windows image problems [source: Microsoft].

4. Reset the Windows Update cache

A broken download cache is one of the most common reasons an update keeps reinstalling and failing. Expect to waste time on this if the download already reached 100% but fails again after every reboot.

Open Windows Terminal as administrator and run:

net stop wuauserv
net stop bits
net stop cryptsvc
net stop msiserver
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old
net start msiserver
net start cryptsvc
net start bits
net start wuauserv

Restart the PC. Then check for updates again. Windows will rebuild those folders. The next scan may take longer than usual. That is normal.

5. Try manual installation

If Windows Update still fails, download KB5064401 manually from the Microsoft Update Catalog. Search for the KB number, choose the correct version for your system, and install the .msu file.

Check your system type first:

  • Open Settings > System > About.
  • Look at System type.
  • Most Windows 11 PCs use x64. Some newer devices may use ARM64.

If the manual installer says the update is not applicable, do not force it. You may already have a newer cumulative update, or the package may not match your Windows 11 version.

6. Check drivers, BIOS, and rollback clues

If KB5064401 installs, restarts, then rolls back, suspect drivers. Display, storage, Wi-Fi, and chipset drivers are common trouble spots. Update them from the PC maker’s support page, not from random driver sites.

Also check:

  • Reliability Monitor: Search for “Reliability” in Start and open View reliability history.
  • Event Viewer: Check Windows Logs > Setup and System.
  • Setup logs: Look under C:\$WINDOWS.~BT\Sources\Panther if there was a rollback.

7. Use an in-place repair if failures repeat

If several updates fail, not just KB5064401, use an in-place repair install. Download the latest Windows 11 ISO from Microsoft, mount it, run setup.exe, and choose Keep personal files and apps. This refreshes Windows without wiping your data.

Back up important files first. A repair install is safe in most cases, but no repair step should be treated as risk-free.

When to stop troubleshooting

Stop if the same update fails on many PCs after the same restart phase. That can mean a known issue, a bad driver release, or a company policy conflict. In that case, collect the KB number, error code, Windows build, device model, and failure percentage. Then report it to your IT team or Microsoft support.

The best fix is not always the most complex one. For KB5064401, start with cache reset and system repair. If that fails, use manual installation. If several updates fail in a row, repair Windows itself.